DX SERIES Complete series

DX-100I-230

P/N. 10716160

PF_DX80i_DX100i_REAR.png
PF_DX100i_34.png

Model

Color

Features

4-channel Class D (SMPS) amplifier with 4in / 8out DSP and DANTE inputs, 2800 W @ 4ohm, 2U DIN, 230 V

  • Power per channel at 4 ohms: 2700 W
  • Number of channels: 4
  • Topology: Class D

Download data sheetWhere to buy

description

The DX-100i are DSP processing amplifiers that offer the same power outputs as the DX-100. The DX-100i accepts analogue, AES3 digital and optional Dante networked audio.

The DX-100i can connect to any source and make it available over the network, as well as processing four additional channels with local analogue outputs to connect to non-DSP DX Series amplifiers. These auxiliary processed outputs can also be fed onto the network, and used by non-DSP DX amplifiers that have Dante cards fitted, or by any other Dante enabled device.

Connectivity for remote control is covered by USB, Ethernet and RS485, with relay of either USB or Ethernet control via RS485 to work with legacy products.

technical data

Output Power Ratings
Power 8 Ohms, Both Channels Driven4 x 1400 W
Power 8 Ohms Bridged5400 W
Power 4 Ohms, Both Channels Driven4 x 2700 W
Power 4 Ohms, Bridged7000 W
Electronics and Connectors
Amplifier Channels4
Output CircuitryClass D
Frequency Response0.5 dB (20 Hz – 20 kHz)
Total Harmonic Distortion< 0,1 %
Input Impeadance20 kohms
Voltage gain32 dB
Damping Factor> 400
ControlsPower On/Off, Channel Mute, Rotary Encoder, Edit Keys, Bank Keys, Navigation Keys
CoolingFront-to-Back
Amplifier ProtectionsProtection Present , Short Circuit, DC Output, Temperature
LED IndicatorsLCD SCreen, Power On, Channel Output Level, Channel Linked, Protection, Bridged Pairs, Standby, Network Audio, Remote Control, Digital In
Audio Signal Input Connector4 x Female XLR
Audio Signal Loop Thru Connector4 x Male XLR
Speaker Output Connector4 x speakON
Current Draw 230 V / 115 V7.5 A / 15.0 A
Certification NumberNRTL: NA201811002, CNEMKO: NA201811002
Dimensions-Weight
Dimensions ( H x W x D )88 x 485 x 425 mm
3,5 x 19,0 x 16,7 in
Net Weight10,9 kg ( 24,0 lb )
Shipping
Carton Dimensions ( H x W x D )250 x 610 x 600 mm
9,8 x 24,0 x 23,6 in
Shipping Weight12,4 kg ( 27,3 lb )

downloads

Title Format Size
Data Sheet
HT_DX100I230_00.pdf PDF 315 Kb
User Manual
UM_DXI_01_EN.pdf PDF 9.3 Mb
Software
SW_DX80i_DX100i_PRESETS_V1.04.zip ZIP 1.14 Mb
SW_DX80i_DX100i_PRESETS_HQ_V1.00.zip ZIP 28 Kb
SW_DX_FIRMWARE_V1.40.zip ZIP 2.96 Mb
SW_AUDIOCORE_V9.36_SETUP.msi MSI 5.91 Mb
Line Drawing
LD_DIM_DX-100i.dwg DWG 3.31 Mb
LD_2D_DX100i.png PNG 1.2 Mb
Catalogs
CAT_DAS_2019_FULL_LINE_01.pdf PDF 26.9 Mb

Download   Download selection

Related products

DX SERIES
DX-100I
AMPLIFIERS

4-channel Class D (SMPS) amplifier with 4in / 8out DSP and DANTE inputs, 2800 W @ 4ohm, 2U DIN, 115 V

  • Power per channel at 4 ohms: 2700 W
  • Number of channels: 4
  • Topology: Class D

More information
DX SERIES
DX-80I
AMPLIFIERS

4-channel Class D (SMPS) amplifier with 4in / 8out DSP and DANTE inputs, 2000 W @ 4ohm, 2U DIN, 230 V

  • Power per channel at 4 ohms: 2000 W
  • Number of channels: 4
  • Topology: Class D

More information
DX SERIES
DX-80I
AMPLIFIERS

4-channel Class D (SMPS) amplifier with 4in / 8out DSP and DANTE inputs, 2000 W @ 4ohm, 2U DIN, 115 V

  • Power per channel at 4 ohms: 2000 W
  • Number of channels: 4
  • Topology: Class D

More information
DX SERIES
DX-100
AMPLIFIERS

4-channel Class D (SMPS) amplifier, 2800 W @ 4ohm, 2U DIN, 230 V

  • Power per channel at 4 ohms: 2700 W
  • Number of channels: 4
  • Topology: Class D

More information
DX SERIES
DX-100
AMPLIFIERS

4-channel Class D (SMPS) amplifier, 2800 W @ 4ohm, 2U DIN, 115 V

  • Power per channel at 4 ohms: 2700 W
  • Number of channels: 4
  • Topology: Class D

More information
DX SERIES
DX-80
AMPLIFIERS

4-channel Class D (SMPS) amplifier, 2000 W @ 4ohm, 2U DIN, 230 V

  • Power per channel at 4 ohms: 2000 W
  • Number of channels: 4
  • Topology: Class D

More information
DX SERIES
DX-80
AMPLIFIERS

4-channel Class D (SMPS) amplifier, 2000 W @ 4ohm, 2U DIN, 115 V

  • Power per channel at 4 ohms: 2000 W
  • Number of channels: 4
  • Topology: Class D

More information

References

DAS Audio with High Wire in Nashville

News

ICON OF THE SEAS

CASE STUDIES

SLOW TIDE GOA

CASE STUDIES

FLORIDA BEACH MIJAS

CASE STUDIES

TATEL RESTAURANT VALENCIA

CASE STUDIES

MUSART FESTIVAL FLORENCE

CASE STUDIES

TEATRO TOM JOBIM ASUNCION

CASE STUDIES

FRIEDRICHSKOOG SEAL SANCTAURY

CASE STUDIES

CONCIERTO CATEDRAL COLONIA

CASE STUDIES

BAD BUNNY SANTO DOMINGO

CASE STUDIES