PRODUCTS / INTEGRAL SERIES
INTEGRAL-A1604
P/N. 10721140
Features
4 channel amplifier, Class D
4 independent inputs
400 W per channel @ 4 ohms
Low Z and High Z (Bridged 70 V/100 V) operation
Hybrid configuration operation (Hi Z and Low Z)
Universal Power Supply
12dB/oct 80Hz HPF filter Selector (on/off)
Automatic Stand-by mode
Applications
Retail Stores
Bars, clubs and restaurants
Fitness Centers, hotels, schools
The amplifier delivers 4x400W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 2x800W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.
Output Power Ratings | |
Power 8 Ohms, Both Channels Driven | 4 x 200 W |
Power 8 Ohms Bridged | 2 x 800 W |
Power 4 Ohms, Both Channels Driven | 4 x 400 W |
Power 100 V | 2 x 800 W |
Power 70 V | 2 x 800 W |
Electronics and Connectors | |
Amplifier Channels | 4 |
Output Circuitry | Class D |
Frequency Response | 20 Hz-30 kHz (+0 – 0.5 dB) |
Sensitivity | 1.38 V (+5 dBu) |
Voltage gain | 32.5 dB |
Damping Factor | >350, each channel (8 Ω load, 1 kHz and below) |
Controls | Power On/Off, Gain Pots |
Cooling | Side-Right-to-Left |
Amplifier Protections | Short Circuit, DC Output, Temperature, Over/Under Voltage |
LED Indicators | On-Protect-Standby, Signal-Clip |
Audio Signal Input Connector | Terminal Block |
Speaker Output Connector | Terminal Block |
Current Draw 230 V / 115 V | 3.0 A / 6.0 A |
Dimensions-Weight | |
Dimensions ( H x W x D ) | 88 x 483 x 208 mm 3,5 x 19,0 x 8,2 in |
Net Weight | 3,8 kg ( 8,2 lb ) |
Shipping | |
Carton Dimensions ( H x W x D ) | 170 x 525 x 315 mm 6,7 x 20,7 x 12,4 in |
Shipping Weight | 4,5 kg ( 9,9 lb ) |