PRODUCTS / INTEGRAL SERIES
INTEGRAL-A402
P/N. 10721090
Features
2 channel amplifier
200 W per channel @ 4 ohms
High Efficiency Class D topology
Low Z and High Z (Bridged 70 V/100 V) operation
Universal Power Supply
12dB/oct 80Hz HPF filter Selector (on/off)
Automatic Stand-by mode
Applications
Retail Stores
Bars, clubs and restaurants
Fitness Centers, hotels, schools
The amplifier delivers 2x200W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 400W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.
Output Power Ratings | |
Power 8 Ohms, Both Channels Driven | 2 x 100 W |
Power 8 Ohms Bridged | 1 x 400 W |
Power 4 Ohms, Both Channels Driven | 2 x 200 W |
Power 100 V | 1 x 400 W |
Power 70 V | 1 x 400 W |
Electronics and Connectors | |
Amplifier Channels | 2 |
Output Circuitry | Class D |
Frequency Response | 20 Hz-30 kHz (+0 – 0.5 dB) |
Sensitivity | 1.38 V (+5 dBu) |
Voltage gain | 30 dB |
Damping Factor | > 1000 (8 Ω load, 1 kHz and below) |
Controls | Power On/Off, Gain Pots |
Cooling | Side-Right-to-Left |
Amplifier Protections | Short Circuit, DC Output, Temperature, Over/Under Voltage |
LED Indicators | On-Protect-Standby, Signal-Clip |
Audio Signal Input Connector | Terminal Block |
Speaker Output Connector | Terminal Block |
Current Draw 230 V / 115 V | 1.5 A / 3.0 A |
Dimensions-Weight | |
Dimensions ( H x W x D ) | 44 x 483 x 208 mm 1,7 x 19,0 x 8,2 in |
Net Weight | 2,7 kg ( 5,9 lb ) |
Shipping | |
Carton Dimensions ( H x W x D ) | 130 x 525 x 315 mm 5,1 x 20,7 x 12,4 in |
Shipping Weight | 3,7 kg ( 8,1 lb ) |