PRODUCTS / ARA SERIES
SARA-100
P/N. 10420510
Model
P/N
Features
Powered compact line array system
100º horizontal coverage
Symmetric V-shaped configuration
4-channel, 3000 Wcontinuous Class D amplifier
FIR processing and digital steering via DASaim™
ALMA™ remote monitoring and control over IP
Fast Set Splay FSS™ for angle setting while stacked
Applications
Outdoor festivals and live concerts
Theatres, auditoria and performing arts centers
Large live music clubs
Live sound touring/Rental services
SARA-100 is a compact line array system with a symmetrical design and 3000Wrms of power, SARA delivers a linear performance of 138 dB SPL MAX and a wide dynamic range, making it perfect for events and medium-sized installations where sound quality and uniformity are a priority.
SARA features two custom designed 8″ loudspeakers for mid and low frequencies and a compression driver for high frequencies with a 100° horizontal dispersion waveguide.
SARA’s Class D amplifier integrates a switch-mode power supply with power factor correction (PFC), ensuring optimum performance and efficiency regardless of the mains voltage. The amplifier provides 3000Wrms of power, divided into 4 channels, two of which are used in bridge mode to power the compression driver, and the remaining two are used to power the 8″ front speakers.
The three-point rigging system can be used for both SARA and SARA-SUB, allowing arrays of up to 24 SARA and 16 SARA-SUB units to be hung. In addition, using the JP-SARA accessory, up to 12 units of SARA can be hung below the SARA-SUB. The FSS™ (Fast Set Splay) system allows angles to be adjusted in 1° steps from the stacked position, significantly reducing assembly time.
| Performance | |
| Frequency Range (-10 dB) | 60 Hz – 18 kHz |
| Horizontal Coverage (-6 dB) | 100º |
| Vertical Coverage | Splay Dependent |
| Maximum Linear SPL1 | 138 dB |
| Maximum SPL2 | 142 dB |
| 1. Measured Maximum Linear SPL at 1m according to AES75 standard using 18dB crest factor M-Noise. 2. Measured Maximum SPL at 1m using burst noise. | |
| Electronics and Connectors | |
| Nominal Amplifier Power (continuous) | 3000 W |
| Input Type | Balanced Analog |
| Input Impeadance | 20 kohms |
| Input Sensitivity | 6.2 V (+18 dBu) |
| Audio Signal Input Connector | 1 x Female XLR |
| Audio Signal Loop Thru Connector | 1 x Male XLR |
| Audio/Data Input Connector | etherCON |
| Control | ALMA |
| Audio + Data Loop Thru Connector | etherCON |
| AC Output Connector | powerCON TRUE1 |
| Current Draw 230 V / 115 V | 4 A/8 A |
| Sampling Rate | 96kHz |
| Enclosure | |
| Enclosure Construction | Birch Plywood |
| Enclosure Geometry | Trapezoidal 10º |
| Rigging | Captive Rigging System |
| Finish | ISO-flex Paint |
| Color | Black |
| IP Rating | IP43 |
| Dimensions ( H x W x D ) | 265 x 655 x 515 mm 10,5 x 26,0 x 20,3 in |
| Net Weight | 34,0 kg ( 75,0 lb ) |
| Components | |
| MF Driver | 8GXN4 |
| HF Driver | M-78N |
Download selection
| AX-PULL-SARA | Pull-back hardware for the bottom box of a SARA array. |
| AX-SARA | Rigging bumper for SARA (max 24 u.) and SARA-SUB (max 16 u.), black |
| AX-SARA-LT | Rigging bumper for SARA (max 12 u.), black |
| AXS-SARA | Stacking bracket for SARA (max 4 u. when stacked on any sub), black. |
| EC-09 | 0.9m CAT5e etherCON (data+audio) DASnet cable |
| EC-20 | 20m CAT7 etherCON (data+audio) DASnet cable |
| EC-30 | 30m CAT7 etherCON (data+audio) DASnet cable |
| ECPK-20 | 20m Hybrid CAT7 etherCON (data+audio)+powerCON TRUE 1, DASnet cable |
| FRAME-AX-SARA | Rigging frame for the AX-SARA, black |
| FUN-4-SARA | Protective transport cover for 4 u. SARA on PL-SARA, black |
| GS-PL-SARA | Kit of adjustable extensions compatible with PL-SARA to stabilize and angle the system in stack configuration. |
| JP-SARA | Joining plate for array assembling SARA/SARA-SUB, black |
| PICKUP-AX-SARA | Pick-up bar for the AX-SARA, black. |
| PL-SARA | Steel transport dolly for SARA (max 4 u.), black |
| PLINK1-09 | 0.9m powerCON TRUE1 cable |
| RACK-ARA-208 | The RACK-ARA-208 is a robust 8U touring rack, designed by DAS Audio for the ARA systems. Built from birch plywood and finished with polyurea paint, it ensures durability in demanding touring conditions. The RACK-ARA-208 houses a Matrix-66 input/output signal+Alma panel, efficiently managing power and signal distribution. To optimize connectivity, it features a PP-6S power distribution panel with six Powercon True1 outlets and a Socapex connector with six circuits. In addition to versatility, the rack is equipped with a PD-6-208V 3-phase 32A power distributor for efficient power management. Integrated M10 nuts in its structure provide suspension points when required, enhancing the rack’s adaptability. The RACK-ARA-208V offers a blend of resilience, functionality, and flexible operation, designed for efficient setup across varied conditions. |
| RACK-ARA-230 | The RACK-ARA-230, is a robust 8U touring rack, designed by DAS Audio for the ARA systems. Built from birch plywood and finished with polyurea paint, it ensures durability in demanding touring conditions. The RACK-ARA-230 houses a Matrix-66 input/output signal+Alma panel, efficiently managing power and signal distribution. To optimize connectivity, it features a PP-6S power distribution panel with six Powercon True1 outlets and a Socapex connector with six circuits. In addition to versatility, the rack is equipped with a PD-6-230V 3-phase 32A power distributor for efficient power management. Integrated M10 nuts in its structure provide suspension points when required, enhancing the rack’s adaptability. The RACK-ARA offers a blend of resilience, functionality, and flexible operation, designed for efficient setup across varied conditions. |
| TOP-PL-SARA | Wooden transport support for 4 SARA on PL-SARA |
