PRODUCTS / WR SERIES
WR-6412-DXW
P/N. 10428130
Model
P/N
Features
2-way system for outdoor installation
DX finish (Fiberglass) for direct exposure
IP54 ingress protection rating
1 x 12AV loudspeaker
M-75 compression driver with 3″ diaphragm
Rotatable 60º x 40º horn design
Stainless steel fixing points
Applications
Professional installation systems
Houses of worship
Auditoriums/Theaters
Theme parks
Outdoor Applications
The WR-6412-DXW employs a 12AV woofer for low frequency reproduction. A M-75 compression driver with 3″ titanium diaphragm attached to a 60º x 40º rotatable horn provides exceptional high frequency reproduction. The rugged birch plywood cabinet construction is available in black, white or military grey depending on the finish.
The WR-6412-DXW offers two exposure ratings: CX (covered exposure) for applications where cabinets are covered or protected, and DX (direct exposure) where cabinets are unprotected and directly exposed to the environment. The CX versions are protected with a thick ISO-flex polyurea coating on the exterior surface. The DX versions augment the protection rating by employing a fiberglass exterior. Stainless steel fittings and mounting hardware are offered on both versions.
| Performance | |
| Frequency Range (-10 dB) | 60 Hz – 20 kHz |
| Horizontal Coverage (-6 dB) | 60º |
| Vertical Coverage | 40º |
| Nominal Impedance | 8 ohms |
| RMS Power Handling | 400 W |
| Peak Power Handling | 1600 W |
| On-axis Sensitivity 1W/1 m | 98 dB SPL |
| Maximum Peak SPL at 1 m | 130 dB |
| Recommended Amplifier | INTEGRAL-A402 INTEGRAL-A404 INTEGRAL-A1002 INTEGRAL-A1004 INTEGRAL-A1602 INTEGRAL-A1604 INTEGRAL-MA1004 INTEGRAL-MA1604 |
| Recommended Processor | INTEGRAL-M88 INTEGRAL-MA1604 INTEGRAL-MA1004 |
| Connectors | |
| Audio Input Connector | Covered Barrier Strip Terminals |
| Audio Output Connector | Covered Barrier Strip Terminals |
| Enclosure | |
| Enclosure Construction | Birch Plywood |
| Enclosure Geometry | Trapezoidal |
| Rigging | M10 Rigging Points |
| Finish | Fiberglass |
| Color | Black |
| IP Rating | IP54 |
| Depth | 395 mm (15,6 in) |
| Dimensions ( H x W x D ) | 705 x 395 x 395 mm 27,8 x 15,6 x 15,6 in |
| Net Weight | 31,5 kg ( 69,5 lb ) |
| Components | |
| LF Driver | 12P |
| HF Driver | M-75 |
| Horn/Waveguide | BC-64AL |
| Shipping | |
| Carton Dimensions ( H x W x D ) | 773 x 458 x 472 mm 30,4 x 18,0 x 18,6 in |
| Shipping Weight | 34,0 kg ( 75,0 lb ) |
Download selection
| ANL-2 | Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying |
| AX-SPG1 | 28 mm TV clamp spigot adapter with M10 thread for AXU/AXF brackets |
| AXC-AT | C-clamp for using mounts with lighting truss |
| AXU-WR6412 | “U” bracket, wall/ceiling/truss, for all WR-6412 models and WR-121S-FX, black |
| 12P | Low-mid frequency 12″ speaker, 3″ VCD, ferrite magnet, 400 W AES, 8 ohm |
| BC-64AL | 60 x 40 horn, aluminium, 1.5″ throat |
| F-WR6412-5 | Passive crossover for WR-6142/WR-6415 models |
| GM-12P | Recone kit for 12P speaker |
| GM-M75N | Diaphragm for M-75N/M-75/M-80 compression driver |
| M-75 | Compression driver, 3″ VCD, ferrite magnet, 1.5″ throat, 100 W AES, 8 ohm |
