PRODUCTS / WR SERIES
WR-6415-CX
P/N. 10428070
Model
P/N
Features
EN54-24 certified for use in voice alarm systems
2-way system for outdoor installation
CX finish (ISO-flex) for covered exposure
IP56 ingress protection rating
15AV woofer with 3” voice coil
M-75 compression driver with 3″ diaphragm
Rotatable 60º x 40º horn design
Stainless steel fixing points
Applications
Professional installation systems
Houses of worship
Auditoriums/Theaters
Theme parks
Outdoor Applications
The WR6415-CX employs a 15AV woofer for low frequency reproduction. A M-75 compression driver with 3″ titanium diaphragm attached to a 60º x 40º rotatable horn provides brilliant highs. The rugged birch plywood cabinet construction is available in black, white or military grey, depending on the finish.
The WR-6415-CX offers two exposure ratings: CX (covered exposure) for applications where cabinets are covered or protected, and DX (direct exposure) where cabinets are unprotected and directly exposed to the environment. The CX versions are protected with a thick ISO-flex polyurea coating on the exterior surface. The DX versions augment the protection rating by employing a fiberglass exterior. Stainless steel fittings and mounting hardware are offered on both versions.
| Performance | |
| Frequency Range (-10 dB) | 55 Hz – 20 kHz |
| Horizontal Coverage (-6 dB) | 60º |
| Vertical Coverage | 40º |
| Nominal Impedance | 8 ohms |
| RMS Power Handling | 400 W |
| Peak Power Handling | 1600 W |
| On-axis Sensitivity 1W/1 m | 99 dB SPL |
| Maximum Peak SPL at 1 m | 131 dB |
| Recommended Amplifier | INTEGRAL-A402 INTEGRAL-A404 INTEGRAL-A1002 INTEGRAL-A1004 INTEGRAL-A1602 INTEGRAL-A1604 INTEGRAL-MA1004 INTEGRAL-MA1604 |
| Recommended Processor | INTEGRAL-M88 INTEGRAL-MA1604 INTEGRAL-MA1004 |
| Connectors | |
| Audio Input Connector | Covered Barrier Strip Terminals |
| Audio Output Connector | Covered Barrier Strip Terminals |
| Enclosure | |
| Enclosure Construction | Birch Plywood |
| Enclosure Geometry | Trapezoidal |
| Rigging | M10 Rigging Points |
| Finish | ISO-flex Paint |
| Color | Black |
| IP Rating | IP56 |
| Depth | 460 mm (18,1 in) |
| Dimensions ( H x W x D ) | 775 x 465 x 460 mm 30,5 x 18,3 x 18,1 in |
| Net Weight | 36,0 kg ( 79,3 lb ) |
| Components | |
| LF Driver | 15AV |
| HF Driver | M-75 |
| Horn/Waveguide | BC-64AL |
| Shipping | |
| Carton Dimensions ( H x W x D ) | 842 x 525 x 535 mm 33,1 x 20,7 x 21,1 in |
| Shipping Weight | 39,5 kg ( 87,0 lb ) |
Download selection
| ANL-2 | Set of 4 M10x40 forged steel eyebolts+4 carabiners, for flying |
| AX-SPG1 | 28 mm TV clamp spigot adapter with M10 thread for AXU/AXF brackets |
| AXC-AT | C-clamp for using mounts with lighting truss |
| AXU-WR6415 | “U” bracket, wall/ceiling/truss, for all WR-6415 models and WR-151S, black |
| 15AV | Low-mid frequency 15″ speaker, 3″ VCD, ferrite magnet, 400 W AES, 8 ohm |
| BC-64AL | 60 x 40 horn, aluminium, 1.5″ throat |
| F-WR6412-5 | Passive crossover for WR-6142/WR-6415 models |
| GM-15P | Recone kit for 15P speaker |
| GM-M75N | Diaphragm for M-75N/M-75/M-80 compression driver |
| M-75 | Compression driver, 3″ VCD, ferrite magnet, 1.5″ throat, 100 W AES, 8 ohm |
