P/N. 10718001
Modèle
Couleur
Caractéristiques
Amplificateur 4 canaux 250 W @ 4 ohms ou 2 canaux 500 W @ 100 V, 2 u. DIN
The EP Series EP-2K4 offers 600 W per channel at four ohms. The amplifiers also offer operation in bridge mode.
The rear panel incorporates switches for changing the gain, and selection between standard and bridge modes. Input and output connections are made through XLR connectors. The EP-2K4 is housed in a rugged 2-unit high steel chassis.
| Output Power Ratings | |
| Power 8 Ohms, Both Channels Driven | 4 x 300 W |
| Power 8 Ohms Bridged | 2 x 1200 W |
| Power 4 Ohms, Both Channels Driven | 4 x 600 W |
| Electronics and Connectors | |
| Amplifier Channels | 4 |
| Output Circuitry | Switched Amplification |
| Frequency Response | 10 Hz-30 kHz |
| Voltage gain | 23 – 44 dB (Rear DIPs adjustable) |
| Controls | Power On/Off, Gain Pots, Rear DIP Switches |
| Cooling | Front-to-Back |
| Amplifier Protections | Thermal, Overload, Short Circuit, Over Current |
| LED Indicators | Independent Channel Meters, Clip/VPL, Temp, Mute, VHF, On |
| Audio Signal Input Connector | 4 x Balanced Neutrik XLR |
| Speaker Output Connector | 4 x Neutrik NL4 |
| Current Draw 230 V / 115 V | -/ 15 A |
| Dimensions-Weight | |
| Dimensions ( H x W x D ) | 95 x 483 x 415 mm 3,8 x 19,0 x 16,3 in |
| Net Weight | 12,0 kg ( 26,4 lb ) |
| Shipping | |
| Carton Dimensions ( H x W x D ) | 190 x 525 x 570 mm 6,7 x 20,7 x 22,4 in |
| Shipping Weight | 13,0 kg ( 28,7 lb ) |
Avantages
Solutions
Projects
Produits
Système Line Array
Système a courbure constante
Enceinte point source
Retours de scène
Colonnes
Caissons de basses
Logiciels
Dispositifs d'installation
Processeurs
Amplificateurs
Racks
Accessoires
Ceiling Speakers
Pendant Speakers
EP SERIES Complète série
Télécharger la fiche technique
Télécharger la sélection