PRODUCTOS / EP SERIES
EP-22K4-115
P/N. 10718004
Modelo
P/N
Características
Aplicaciones
The EP Series EP-22K4 offers 4650 W per channel at four ohms. The amplifiers also offer operation in bridge mode.
The rear panel incorporates switches for changing the gain, and selection between standard and bridge modes. Input and output connections are made through XLR connectors. The EP-22K4 is housed in a rugged 2-unit high steel chassis.
| Output Power Ratings | |
| Power 8 Ohms, Both Channels Driven | 4 x 2500 W |
| Power 8 Ohms Bridged | 2 x 9500 W |
| Power 4 Ohms, Both Channels Driven | 4 x 4650 W |
| Electronics and Connectors | |
| Amplifier Channels | 4 |
| Output Circuitry | Switched Amplification |
| Frequency Response | 10 Hz-30 kHz |
| Voltage gain | 23 – 44 dB (Rear DIPs adjustable) |
| Controls | Power On/Off, Gain Pots, Rear DIP Switches |
| Cooling | Front-to-Back |
| Amplifier Protections | Thermal, Overload, Short Circuit, Over Current |
| LED Indicators | Independent Channel Meters, Clip/VPL, Temp, Mute, VHF, On |
| Audio Signal Input Connector | 4 x Balanced Neutrik XLR |
| Speaker Output Connector | 4 x Neutrik NL4 |
| Current Draw 230 V / 115 V | -/ 30 A |
| Dimensions-Weight | |
| Dimensions ( H x W x D ) | 88 x 483 x 555 mm 3,5 x 19,0 x 21,9 in |
| Net Weight | 15,0 kg ( 33,0 lb ) |
| Shipping | |
| Carton Dimensions ( H x W x D ) | 150 x 600 x 640 mm 5,9 x 23,7 x 25,2 in |
| Shipping Weight | 17,0 kg ( 37,5 lb ) |
Descargar selección
